Join the EMC Fraternity.
Make certain you don't miss out when engineers are seeking EMC Products

NEWS & ANNOUNCEMENTS

< Back to News and Announcements

PMM launch new CA0010 Click Analyser for CISPR 14-1, CISPR16-1-1

21/09/2018

MDL Technologies are now able to offer the innovative CA0010 from PMM. This is the full compliance companion for the 9010F EMI FFT receiver providing any kind of click (discontinuous disturbance) analysis and measurement.
By combining the 9010F FFT EMI receiver with the click analyzer it is capable of four simultaneous measurements at the frequencies of 150 kHz, 500 kHz, 1,4 MHz and 30 MHz and can work as a standalone setup for compliant tests. In addition, when connected to a PC, a dedicated software produces a full trace with additional information like IF and QP time diagram of every channel, graph of the detected clicks for each channel and a complete trace with offline Rewind-Play-Pause-Forward capability for any possible use.
This software can also manage a unique internal click calibrator able to generate all the signals required to check the analyzer performance in compliance with CISPR 16-1-1 requirements. It is possible to set all the relevant parameters such as amplitude and duration of each click, the interval between them, the number of click repetition and, last but not least, the amplitude of CISPR pulses. Indeed, unique on the market the CA0010 Calibrator embeds a full compliance B-Band Cispr16-1-1 pulse generator allowing thus performing the test #2 and #3 of table 14 Cispr16-1-1 without the need of any external additional generator.
The internal click generator is full compliance with the requirements specified in CISPR 16-1-1 and can be used to self-calibrate the CA0010 or any other external click meter.
The same high versatility is also reflected in the User selectable operating modes: two rates/two upper quartiles, two rates/four upper quartiles, four rates/four upper quartiles and single run/double run (not conditioned by the previous ones).
Full compliant to all old and new “click” existing standards: CISPR 16-1-1:2015 Ed. 4 and previous editions, CISPR 14-1:2016 Ed. 6 and previous editions, CENELEC old and new equivalent versions of these two standards (EN 55016-1-1 and EN 55014-1). This Click Meter also features an internal 16 ampere LISN (although an external one can always be connected) and a switch operations counting unit, too.
The CA0010 has an outstanding dynamic range and saturation control, thanks to the internal tailored preselection, guaranteed by its CISPR full compliance RF front end.

Don't miss out.
Make sure you subscribe for inclusion in the Product Finder.

SUBSCRIBE TODAY